12/24VDC USB POLE CHARGING UNIT
12/24VDC USB POLE CHARGING UNIT
POWERVERTER POLE MOUNTED
PASSENGER ACCESSIBLE USB CHARGERS FOR POLE INSTALLATIONS
USB is the preferred method for charging mobile devices on the move. The Alfatronix range of PVPro chargers can already be seen installed on vehicle walls, seat backs and table tops as well as under seats. The PVPm-S USB charger is designed for applications where journeys are relatively short and passengers are standing for some or all of their time on the vehicle. These units are designed for installation onto vertical poles and offer a robust solution for buses, trams, trains and metro carriages.
The units are designed to be fitted directly to 35mm diameter poles and provide an easily accessible and strong charging solution. These chargers utilise the latest fast charge technology and will seek to communicate with the phone and where compatibility exists, will automatically increase the charge voltage. Using this system, it is possible to provide a useful charging boost even over relatively short time periods.
THE RANGE
The PVPm range has been designed to meet the rigorous standards required for on board commercial vehicle applications including EN50498 and ISO7637-2 and is both CE and E marked (Reg10). The casings are made from V0-rated (self-extinguishing) high impact polycarbonate and the PCB is populated by computer-controlled SMT for maximum accuracy and durability.
APPROVALS AND MANUFACTURE
The range has been designed to meet the rigorous standards required for on board commercial vehicle applications including EN50498, ISO7637-2, and is both CE and E marked (Reg10). The casings are made from V0 rated (self-extinguishing) high impact polycarbonate and the electronic assembly is predominantly by computer controlled SMT for maximum durability.
WARRANTY
The PVPm Series of Pole mounted USB chargers are manufactured using rugged components to provide years of service in demanding commercial environments and are covered by a three year return to base warranty.
Download Full Application Leaflet
CHOOSE YOUR USB PV65R PRODUCT
| Part Number | Description | Dimensions (mm) | Weight |
| PVPWp-S | Single output 12/24-5V USB Charger 2.1A | Ø37 x 49; Hole Ø30 | 21g |
| PVPWp-D | Double output 12/24-5V USB 3.0A (1.5A per socket) | Diameter 37x49; Hole 30 | 25g |
| PVPWp-SFf | Single output charge only 12/24-5V USB 2.1A Front fitting | Ø47 x 49; Hole Ø30 | 24g |
| PVPWp-DFf | Double output 12/24-5V USB Charger 3.0A Front fitting | Ø47 x 49; Hole Ø30 | 28g |
| USB-POD | Underseat mounting pod for USB Chargers | Width 60; Height 52; Depth 80 | 55g |
| USB-TPOD | Table mounting pod for USB Chargers | Width 103; Height 45; Depth 88 | 62g |
| PV USB-H1 | Standard 1.2m wiring with inline 2A fuse | 1 x Red 1.2m, 1 x Black 1.2m | 50g |
Technical Data
| Input voltage range | 9-32Vdc |
| Output voltage | 5Vdc/-0.2v |
| Output Power | 2.1A (single) 3.0A (double) - max 1.5A per socket |
| Application | Charges all USB devices including Apple and Android |
| Transient voltage protection | Meets ISO7637-2 International standard for 24V vehicles |
| Output noise | <50mV pk-pk |
| Off load current (quiescent current) | <1.7mA |
| Power conversion efficiency | 90% |
| Operating temperature | -25°C to +30°C to meet this specification table |
| Storage temperature | -25°C to +100°C |
| Operating humidity | 95% max. non-condensing |
| Casework | Black polycarbonate body |
| Connections | Input: 6.3mm push-in flat blade connectors Output: USB type single/double socket - tested to 10000 mating cycles |
| Output indicator | Blue LED output indication |
| Mounting method | 30mm diameter hole with or without bezel. |
| Safe area protection: Over current Over heat Overvoltage and Undervoltage Reverse Polarity Transients Catastrophic protection |
Limited by current sensing circuit Limited by temperature sensing circuit Limited by sensing circuit Limited by sensing circuit Protected by filters and rugged component selection Internal fuse |
| Approvals | 2014/30/EU The general EMC directive Regulation 10 The automotive directive 93/68/EEC The CE marking directive |
| Designed to |
EN50498, ISO 7637-2 & R118 |
| Markings | CE and E marked |
| IP Ratings: | IP65 (Not USB connector) |
