12/24VDC USB CHARGERS WITH IP65 PROTECTION
USB POWER WITH ADDED LIQUID & DUST INGRESS AND VIBRATION PROTECTION TO IP65
The PV65R range of USB chargers offers all the performance benefits of the PVPro range with additional protection provided to the electronic circuit of the unit. A durable polyurethane compound encompasses the electronic components offering comprehensive protection against dust and liquid ingress to IP65.
This product offers a good solution where tampering might be an issue or in dirty or more challenging environments. Although the nature of the USB connector itself can always be wilfully broken or damaged and will still corrode if repeatedly exposed to liquid ingress, all electronics in these units are protected to IP65.
The range mirrors the very successful PVPro products, offering both single and double outputs and rear fit as well as front fitting options which allow the unit to be replaced quickly and easily should this be required. Automatic short circuitnprotection is also included, so in the event of tampering or compromise, the unit will automatically shut down, then restart once the fault has been removed. All units can be installed on both 12Vdc or 24Vdc vehicles without adjustment.
Units can be installed directly into bulkheads, vehicle walls, into seat fittings and underneath seats using the mounting pod P/N USB-POD. They can also be fitted onto table tops using the horizontal surface mounting pod P/N USB-TPOD.
APPROVALS AND MANUFACTURE
The range has been designed to meet the rigorous standards required for on board commercial vehicle applications including EN50498, ISO7637-2, EN61373 and EN50155 and is both CE and E marked (Reg10). The casings are made from V0 rated (self-extinguishing) high impact polycarbonate and the electronic assembly is predominantly by computer-controlled SMT for maximum durability.
Like all products, the USB chargers are manufactured using rugged components to provide years of service in demanding commercial environments. Due to the limitations of public use, the guarantee on these products is limited to three years.
Choose your PowerVerter USB Product
|PV65R-S||2.1A||Single output 12/24-5V USB Charger 2.1A||Ø37 x 49; Hole Ø30; Rear space req. typ. 36||36g|
|PV65R-D||3A||Double output 12/24-5V USB 3.0A (1.5A per socket)||Diameter 37x49; Hole 30; Rear space req. typ. 36||40g|
|PV65R-SFf||2.1A||Single output charge only 12/24-5V USB 2.1A Front fitting||Ø47 x 49; Hole Ø30; Rear space req. typ. 36||39g|
|PV65R-DFf||3.0A||Double output 12/24-5V USB Charger 3.0A Front fitting||Ø47 x 49; Hole Ø30; Rear space req. typ. 36||43g|
|USB-POD||-||Underseat mounting pod for USB Chargers||Width 60; Height 52; Depth 80||55g|
|USB-TPOD||-||Table mounting pod for USB Chargers||Width 103; Height 45; Depth 88||62g|
|PV USB-H1||-||Standard 1.2m wiring with inline 2A fuse||1 x Red 1.2m, 1 x Black 1.2m||50g|
|Input voltage range||9-32Vdc|
|Output Power||2.1A (single) 3.0A (double) - max 1.5A per socket|
|Application||Charges all USB devices including Apple and Android|
|Transient voltage protection||Meets ISO7637-2 International standard for 24V vehicles|
|Output noise||<50mV pk-pk|
|Off load current (quiescent current)||<1.7mA|
|Power conversion efficiency||90%|
|Operating temperature||-25°C to +30°C to meet this specification table|
|Storage temperature||-25°C to +100°C|
|Operating humidity||95% max. non-condensing|
|Casework||Black polycarbonate body|
|Connections||Input: 6.3mm push-in flat blade connectors
Output: USB type single/double socket - tested to 10000 mating cycles
|Output indicator||Blue LED output indication|
|Mounting method||30mm diameter hole with or without bezel.|
|Safe area protection:
Overvoltage and Undervoltage
Limited by current sensing circuit
Limited by temperature sensing circuit
Limited by sensing circuit
Limited by sensing circuit
Protected by filters and rugged component selection
|Approvals||2014/30/EU The general EMC directive
Regulation 10 The automotive directive
93/68/EEC The CE marking directive
EN50498, EN61373, EN50155, EN50121-3-2, EN45545 & ISO 7637-2, AES5, R118
|Markings||CE and E marked|